Lamp Plates with half inch entry

Name: Lamp Plates with half inch entry
Brand: Lamps and lights
SKU: BB08
Availability: InStock

£6.10 – £9.70

Metal Lamp plate that has a half inch threaded entry. This can be used to create a flush Ceiling Pendant by adding one of our Lampholders and a piece of all thread. Alternatively it takes our metal tubes to create a Ceiling Pendant Light fitting or a Table Lamp.

Supplied with 2 matching screws (not earthed, earth Tags available). This solid brass lamp plate is made in the UK and is available in brass, antique brass and chrome finishes. The screw holes are 50mm apart on the 65mm plate.

For more help on choosing the right lamp parts start with our “Related Blogs & FAQ’s” on this page for loads more useful information. If you are making Bottle or Ceramic Lamps see our “Making Table Lamps Blogs” and also our Table Lamp Designing page for light fitting kits to put together yourself. If you need Pendant Light fitting parts head over to our “Ceiling Pendant Light Designs Page” where again you can put a bespoke Ceiling Rod Lighting kit together yourself.

Product options available
(Select option from dropdown above)

SKU code	Price	Description
BBantique08	£8.00	Antique Lamp fixing plate Dimensions: 6.5 × 6.5 × 3.6 cm
BBbrass08	£6.10	Brass Lamp fixing plate Dimensions: 6.5 × 6.5 × 3.6 cm
BBchrome08	£9.70	Chrome Lamp fixing plate Dimensions: 6.5 × 6.5 × 3.6 cm

Additional information
Reviews (0)

Additional information

Weight	Choose an option to display
Dimensions	Choose an option to display

Reviews

There are no reviews yet.

Be the first to review “Lamp Plates with half inch entry”

You may also like…

CLEAR Lighting Cable – 3 core Braided

£2.70

PRODUCT DETAILS
Wooden Ceiling Rose

£11.30 – £12.00

Colour options available
PRODUCT DETAILS
Lampholder E27 with Shade Rings

£12.20 – £17.60

Colour options available
Bulb holder types available
Edison Screw
PRODUCT DETAILS
Metal Tubes

£5.80 – £22.10

Colour options available
PRODUCT DETAILS

How do I fit the bungs into a Bottle or Ceramic base?Calvin2020-11-04T14:33:03+00:00

How do I fit the bungs into a Bottle or Ceramic base?

You can access a ‘screwdriver slot’ to turn to expand the bung to create a tight fit by removing the reducer that holds down the metal plate. Feed your 3 core braided flex down the bung and through the hole in your lamp then wire up the lampholder and attach it to the ½” threaded reducer on top of the bung. Size 19-22mm fits a standard wine bottle.

What’s the biggest size bung you do?Calvin2022-07-19T09:52:53+01:00

What’s the biggest size bung you do?

Our biggest bung is currently 50mm. You can use some cork or wood to fill the hole if the aperture is bigger than that and insert our fittings into that.

Which regulations apply and bathroom lighting Zones?Calvin2022-05-31T15:04:29+01:00

Which regulations apply and bathroom lighting Zones?

Are you qualified? Installing our lighting is not particularly complex, but carried out incorrectly could prove dangerous. Electrical work is a skilled profession requiring expert knowledge with ever changing rules and accreditations. Electrical contractors are required to regularly update their qualifications. We strongly advise therefore that you instruct a fully qualified NICEIC registered electrician to check and electrically test your work. As a supplier we are not qualified or insured to advise you on how to wire up your lighting schemes so any advice given is of a purely general nature. When selling your home you may also need to provide certification for any electrical work undertaken so certification would be useful then too.
Can I use your products in my Bathroom? IP rated lighting must be used in bathroom areas where water is likely i.e. zones 1 and 2. Un-zoned areas can use standard lighting without an IP rating, See our handy diagram for more help. Bathroom Zones Explained

Lamp Plates with half inch entry