Wooden Table Lamp kits - Raised - for large Lampshade Lamps and Lights

Name: Wooden Table Lamp kits - Raised
Brand: Lamps and lights
SKU: TLK03
Availability: InStock

Wooden Table Lamp kits – Raised

Wooden Table Lamp Kits Raised to take a larger Shade. These can be used to wire pretty much anything made from wood. The tube is hollow so the wiring goes up inside the tube to the lampholder.

Supplied with 2 matching screws these base plates can be screwed down onto a wooden object for a solid fixing or larger shade.

Please refer to a qualified electrician if you are not qualified to rewire a table lamp.

Please see our FAQ’s and Blog posts for more help and information on how to use this product.

SKU: TLK03 Category: Table Lamp Designing

Additional information
Reviews (0)

Additional information

Weight	0.001 kg
Dimensions	24 × 20 × 15 cm
Colour	Antique, Brass, Chrome
Light Bulb and Bulbholder Type	Edison Screw, Bayonet Cap

Reviews

There are no reviews yet.

Be the first to review “Wooden Table Lamp kits – Raised”

You may also like…

Table Lamp Shade carrier for rimmed shade

£26.00 – £27.90

Colour options available
Bulb holder types available
Edison Screw, Bayonet Cap
PRODUCT DETAILS
Table Lamp Shade Carrier

£18.20 – £22.20

Colour options available
Bulb holder types available
Edison Screw, Bayonet Cap
PRODUCT DETAILS
Prismatic glass light shade – Elongated Dome

£32.40

PRODUCT DETAILS

Bulb holder types explainedCalvin2022-08-31T14:47:01+01:00

Bulb holder types explained

SBC – small bayonet cap fitting takes a SBC bulb. Also known as B15d . Cap measures 15mm across.
BC – bayonet cap fitting takes a BC bulb. Also known as B22d. Cap measures 22mm across.
SES – small edison screw fitting takes a SES bulb. Also known as E14. Cap measures 14mm across.
ES – edison screw fitting takes an ES bulb. Also known as E27. Cap measures 27mm across.
GES – giant edison screw fitting takes a GES bulb. Also known as E40. Cap measures 40mm across.

Related glossary entries: Bayonet Edison

Do I need 2 or 3 core lamp flex?Calvin2021-11-10T16:05:48+00:00

Do I need 2 or 3 core lamp flex?

When using any metal light fittings you need to earth the fitting to reduce the risk of electric shock. You therefore need to use our 3 core light flex in either our round or twisted braid as both have live, neutral and earth wires. Our 2 core braided flex only has live and neutral wires and therefore is only suitable for use with non-metal light fittings. If in any doubt please always refer to a qualified electrician.

Watch video in new window

Do you provide any Electrical or Restoration Services?Calvin2021-08-06T14:44:05+01:00

Do you provide any Electrical or Restoration Services?

We do not undertake the restoration or wiring up of our products. We sell components individually not fitted together. Once we put them together we would have to send them off to be PAT tested. You can buy the components and get an electrician to put them together and PAT test them for you?

Need an Electrician to put our products together? You can find one in your area here NICEIC or here ECA
Need a Restorer? You can find one here BAFRA

How do I fit the bungs into a Bottle or Ceramic base?Calvin2020-11-04T14:33:03+00:00

How do I fit the bungs into a Bottle or Ceramic base?

You can access a ‘screwdriver slot’ to turn to expand the bung to create a tight fit by removing the reducer that holds down the metal plate. Feed your 3 core braided flex down the bung and through the hole in your lamp then wire up the lampholder and attach it to the ½” threaded reducer on top of the bung. Size 19-22mm fits a standard wine bottle.

How to wire up lampholders?Calvin2022-08-31T14:52:07+01:00

How to wire up lampholders?

The earth is marked in the middle of the insert. The live is the one that from underneath you can see goes across to the centre of the insert.

We also have a list of useful “How to” videos on our YouTube channel that includes a video “Metal Bayonet Lampholder Wiring & Testing” where you can see our bayonet cap lamp holder being wired up and tested by an Electrician.

Please do check your work with an electrician though as this advice is strictly general & can vary depending on many factors relating to the individual use of a product and your domestic set up.

Related glossary entries: Bayonet Edison

I’m having trouble putting the side entry lamp holder kit together?Calvin2022-03-15T16:57:31+00:00

I’m having trouble putting the side entry lamp holder kit together?

Our side entry lamp holder kits are usually put together for you. If not, you just need to switch the reducer round.

Undo the reducer screwed on the top of the bung.
Screw the side entry tube onto the bung where the reducer came off.
Put the reducer on top of the side entry tube ready for your lampholder.

The side entry tube is now the right way up so the flex can be gripped by the black grip screw above the entry hole in the tube.

What size are your light shades?Calvin2022-07-19T09:57:00+01:00

What size are your light shades?

Our light shades come in various sizes from Small 120mm to extra large 350mm+

Small 120-150mm wide

Medium 160-210mm wide

Large 220-290mm wide

Extra Large 300-340mm

X extra large 350mm+

Simply use the Light shade filter available on our Light Shades Page to choose the right size.

What’s the biggest size bung you do?Calvin2022-07-19T09:52:53+01:00

What’s the biggest size bung you do?

Our biggest bung is currently 50mm. You can use some cork or wood to fill the hole if the aperture is bigger than that and insert our fittings into that.

Wooden Table Lamp kits – Raised

Wooden Table Lamp kits – Raised

Light Bulb 1 Light Bulb

Lampholder ES 2 Lampholder ES

Lampholder BC 3 Lampholder BC

Lighting Flex 4 Lighting Flex

Switch 5 Switch

Plug 6 Plug

7 Review and Purchase

Additional information

Reviews

Leave A Comment Cancel reply

You may also like…

Table Lamp Shade carrier for rimmed shade

Table Lamp Shade Carrier

Prismatic glass light shade – Elongated Dome

Table Lamp Harps

Raisers and Couplers

Wooden Table and Standard Lamp Kits

Bottle and Ceramic Table Lamp Kit

Bulb holder types explained

Do I need 2 or 3 core lamp flex?

Do you provide any Electrical or Restoration Services?

How do I fit the bungs into a Bottle or Ceramic base?

How to wire up lampholders?

I’m having trouble putting the side entry lamp holder kit together?

What size are your light shades?

What’s the biggest size bung you do?

Title

Wooden Table Lamp kits – Raised

Wooden Table Lamp kits – Raised

Light Bulb 1 Light Bulb

Lampholder ES 2 Lampholder ES

Lampholder BC 3 Lampholder BC

Lighting Flex 4 Lighting Flex

Switch 5 Switch

Plug 6 Plug

7 Review and Purchase

Additional information

Reviews

Leave A Comment Cancel reply

You may also like…

Related products

Title