Bottle and Ceramic Table Lamp Kit

Please select a half inch entry lampholder if you are planning to use our bungs as these have a half inch 26 TPI thread, the same as our lampholders.

Please select a half inch entry lampholder if you are planning to use our bungs as these have a half inch 26 TPI thread, the same as our lampholders. We highly recommend adding a switch to your flex rather than a switched lampholder so as to avoid rocking of the lampholder.

If you don’t require a component from one of the product sections e.g. a bung please just skip that stage using the flow chart or select “Clear selection” on the product page itself.

If you have any metal components in your design they must be earthed. We have therefore only offered 3 core braided lighting flex for reasons of safety and for ease of wiring. Our Designer Linen and Sackcloth flex is not included as an option as it is a little wider and does not easily go through the Bung or Side entry tube. Please always consult a qualified electrician and have your design electrically tested.

If you don’t require a component from one of the product sections e.g. a switch please just skip that stage using the flow chart or select “Clear selection” on the product page itself.